HOSOKAWA ALPINE Aktiengesellschaft(细川阿尔派股份公司)商标

Dry Media Mill ATR

  • Dry media mill for superfine products with finenesses to approx. 80% <2µm and a high specific surface.
  • Double-walled mill housing to permit water cooling.
  • The mill operates in circuit mode with Hosokawa Alpine Turboplex ultrafine classifiers.
  • Principle of Operation

    The vertical agitated media mill comprises a cylindrical grinding chamber that is filled with grinding beads of a few millimetres in diameter. The ratio of grinding beads to product is adjusted such that the spaces between the grinding beads are just filled with product. Because of the small grinding beads, the particle size of the feed material should not exceed 100 µm. The agitator shaft with its arms dips into the bed of material and grinding beads and is set into slow rotation by a gear unit connected to a motor.

    The peripheral speed of the agitator arms is about 2.5 – 3 m/s. At such low speeds, the energy introduced by the agitator is transmitted mainly by friction into the bed of material. A discharge screw at the lower end of the mill simultaneously extracts the blend of grinding beads and product. The grinding beads are separated with a screening machine and returned to the mill. Because of the high fineness values produced with the mill, virtually all products have a strong tendency to deposit, and a grinding aid needs to be added.

  • Features
    • Highest fineness values up to 90% < 2 µm with a downstream classifying step
    • High capacity in relation to machine size, approx. 200 kW/m³ beads
    • Compact design
    • Iron-free grinding, high degree of whiteness
    • Low peripheral speed, optimum energy utilisation, extremely reliable operation
    • Low grinding media wear, low operating costs
    • Extremely long service life of lining, low maintenance costs
  • Applications

    Typical applications for ATR mills are mineral fillers, glazing raw materials and non-mineral hard materials. Examples: limestone, quartz, zircon sand, talc, ceramic colours and frits, titanium dioxide, etc.

    • Minerals: The mill is used for the ultrafine comminution of mineral fillers or glazing raw materials. Aluminium oxide grinding beads with a diameter of 4 mm are employed in this case. The mill is lined with aluminium oxide and the arms of the agitator are protected by means of aluminium oxide tips to minimise wear and to keep the degree of whiteness in fillers as high as possible. The end product is produced in a downstream classifying circuit with the Turboplex air classifier ATP or the turbo-twin air classifier TTC, whereby the coarse material is returned to the mill via a weighing bin. The discharged fines are replaced constantly by new feed material
    • Starch deterioration:When baking bread rolls, it is advantageous if the dough has a high water absorption capacity. The amount of water absorbed by the ample starch in wheat flour can be increased by 20% if the flour is stressed in passing through the ATR. The external classifying step can be omitted in this case. The mill is filled with grinding beads made of special-grade steel for this application, and is not lined, merely the agitator arms are protected against wear by hardfacing. The mill jacket is cooled with water and the grinding beads are cooled by air after being separated from the flour and before they are returned to the mill. This is necessary in order to keep the temperature of the flour below 50° C.
  • Versatility
    • Depending on the product being processed, either aluminium oxide or other wearproof materials are used. Grinding beads of between 2 mm and 5 mm in diameter guarantee maximum energy intensity and an effective surface enlargement in the end product.
    • The product can be coated during grinding, which makes the normally required grinding aid unnecessary.

Contact:

Minerals & Metals Division
Tel. +49 821 5906-279
Fax: +49 821 5906-610
»  e-mail

PDF Downloads

  • Dry ultrafine grinding with agitated ball mill ATR
    141
    + 其它语言

产品宣传册下载说明

我们在多个网页上为您提供包含详细信息的相应的产品宣传册。除此之外您还可以在我们 2 个业务部的统一下载产品宣传册汇总中找到所有的产品宣传册。 借助产品宣传册心愿单您可以将不同网页上的产品宣传册逐个收集起来,然后再进行下载。为此,您需要在一张表格中登记您的电子邮箱地址和一些其它信息。 我们会发给您一封电子邮件用于下载:邮件中包含的超链接可启动 PDF 产品宣传册文件下载。

PDF 心愿单:

 
您最新的心愿单: 0

产品宣传册下载说明

我们在多个网页上为您提供包含详细信息的相应的产品宣传册。除此之外您还可以在我们 2 个业务部的统一下载产品宣传册汇总中找到所有的产品宣传册。 借助产品宣传册心愿单您可以将不同网页上的产品宣传册逐个收集起来,然后再进行下载。为此,您需要在一张表格中登记您的电子邮箱地址和一些其它信息。 我们会发给您一封电子邮件用于下载:邮件中包含的超链接可启动 PDF 产品宣传册文件下载。