HOSOKAWA ALPINE Aktiengesellschaft(细川阿尔派股份公司)商标

Ultrafine Classifier - ATP Turboplex

  • Single-wheel or multi-wheel air classifier for ultrafine classifying operations.
  • Superfine powders in the fineness range d97 = 5 to 10 µm; with the NG model, finenesses of d97 = 2 µm (d50 = 0.3 µm) are possible.
  • Spatter-grain-free operation over the entire separation range.
  • Integrated coarse material classifier to increase the cut point.
  • Low-wear mode of operation.
  • Principle of operation

    After entering the machine, the classifying air flows through the classifying wheel in centripetal direction. In the process, the classifying wheel extracts the fines from the feed material and conveys them to the fines discharge. The coarse material rejected by the classifying wheel gravitates downwards. The air routing shown in the schematic is much simplified, because before the coarse material exits the classifier, it is rinsed again intensively by air to remove the remaining fines. This results in an extremely clean coarse fraction.

    The product is fed either via a rotary valve or in the case of an air-flow classifier, entrained in the classifying air. Product fineness is controlled by adjustment of the classifier wheel speed using a frequency converter. The horizontal arrangement of the classifying wheel means that even "difficult" products can be processed with no problem.

  • Features

    There is hardly another type of classifier that is so well adapted to the demands of practical operation as the Turboplex ultrafine classifier:

    • The simple and robust design reduces costs for maintenance and servicing.
    • The horizontal arrangement of the classifying wheel reduces wear even with abrasive products and guarantees a long service life.
    • If processing extremely abrasive products, a wear-protection lining prevents excessive wear.
    • Modest space requirement.
    • High fines yield.
    • Sharp top size limitation.
    • Stable operation even if the feed rate fluctuates.
    • Long service life.
    • Coating formation prevented, e.g. when classifying CaCO3.
    • Rinsing gap easy to adjust.
    • Narrow rinsing gap possible.
    • Vibration-free.
  • Designs

    All single-wheel and multi-wheel ATP classifiers can be delivered in pressureless design. With the exception of the 750 ATP and the 1000 ATP, the classifiers are available to order in explosion-pressure-shock-proof design to 10 bar overpressure.

  • Wear protection

    The materials of construction and the wear protection is customised for the individual application. For the pharmaceuticals industry, the ATP is manufactured in stainless steel.

  • Video

Contacts:

Minerals & Metals Division
Tel. +49 821 5906-279
Fax: +49 821 5906-610
»  e-mail

Chemicals Division
Tel. +49 821 5906-402
Fax: +49 821 5906-438
­»  e-mail

Pharma & Lab Division
Tel. +49 821 5906-283
Fax: +49 821 5906-620
»  e-mail

Food Division
Tel. +49 821 5906-406
Fax: +49 821 5906-655
»  e-mail

Recycling & Granulators Division
Tel. +49 821 5906-415
Fax: +49 821 5906-630
»  e-mail

PDF 心愿单:

 
您最新的心愿单: 0

产品宣传册下载说明

我们在多个网页上为您提供包含详细信息的相应的产品宣传册。除此之外您还可以在我们 2 个业务部的统一下载产品宣传册汇总中找到所有的产品宣传册。 借助产品宣传册心愿单您可以将不同网页上的产品宣传册逐个收集起来,然后再进行下载。为此,您需要在一张表格中登记您的电子邮箱地址和一些其它信息。 我们会发给您一封电子邮件用于下载:邮件中包含的超链接可启动 PDF 产品宣传册文件下载。